{"title":"HR PRODUCT","description":null,"products":[{"product_id":"female-adaptor-poly-compression-fitting-size-bsp-thread-r31-series","title":"Rural Poly Compression Female Adaptor R31 – Rural Pipe x Female BSP Thread, Sizes up to 2 inch x 2 inch","description":"\u003ch2\u003eR31 Rural Poly Compression Female Adaptor for Male BSP Threads\u003c\/h2\u003e\n\u003cp\u003eThe R31 Series Rural Poly Compression Female Adaptor connects rural poly pipe to a male BSP threaded fitting. The compression end grips the pipe with a screw-down nut, and the female BSP thread screws onto a tap, ball valve, pump outlet, nipple, riser or float valve. The range runs from ¾ inch to 2 inch pipe, in equal and step-down thread sizes.\u003c\/p\u003e\n\u003ch2\u003eConnecting Rural Pipe to Male Threads\u003c\/h2\u003e\n\u003cp\u003ePlenty of rural water gear has a male thread: many ball valves, hose taps, trough float valves, pump outlets, nipples and standpipes. The R31 female adaptor lets rural poly connect straight onto them. Screw the adaptor onto the male thread, push the pipe into the compression end and tighten the nut, and the connection is made with no glue, heat or barbs.\u003c\/p\u003e\n\u003ch2\u003eDecoding the R31 Codes\u003c\/h2\u003e\n\u003cp\u003eEach code lists the pipe size first and then the thread size, in millimetre shorthand. R31-2020 is ¾ inch pipe to a ¾ inch female thread, R31-2520 is 1 inch pipe to ¾ inch, R31-2525 is 1 inch pipe to 1 inch, R31-3225 is 1¼ inch pipe to 1 inch, and R31-5050 is 2 inch pipe to a 2 inch female thread. Match the first number to your rural poly and the second to the male thread you are connecting to.\u003c\/p\u003e\n\u003ch2\u003eFrom Garden Taps to 2 Inch Mains\u003c\/h2\u003e\n\u003cp\u003eThe smaller ¾ inch and 1 inch sizes suit garden taps, small valves and house supply lines. The 1¼ inch size steps a larger line down onto a 1 inch valve or pump, and the 2 inch x 2 inch size suits main supply lines, large ball valves and pump outlets on farms and bigger properties.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRural poly compression x female BSP thread\u003c\/li\u003e\n\u003cli\u003eConnects rural pipe to taps, valves, pumps, nipples and risers\u003c\/li\u003e\n\u003cli\u003eCompression nut grips and seals the pipe\u003c\/li\u003e\n\u003cli\u003eNo glue, heat or barbs needed\u003c\/li\u003e\n\u003cli\u003eEqual and step-down size options from ¾ inch to 2 inch\u003c\/li\u003e\n\u003cli\u003eCan be undone and reused\u003c\/li\u003e\n\u003cli\u003eUV stabilised for outdoor and buried use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: R31\u003c\/li\u003e\n\u003cli\u003eType: Female adaptor\u003c\/li\u003e\n\u003cli\u003eConnection: Rural poly compression x female BSP thread\u003c\/li\u003e\n\u003cli\u003eSuitable pipe: Rural poly pipe\u003c\/li\u003e\n\u003cli\u003eSizes and codes: ¾ inch x ¾ inch (R31-2020), 1 inch x ¾ inch (R31-2520), 1 inch x 1 inch (R31-2525), 1¼ inch x 1 inch (R31-3225), 2 inch x 2 inch (R31-5050)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitting onto a Valve or Tap\u003c\/h2\u003e\n\u003cp\u003eWrap the male thread of the valve, tap or nipple with thread tape, winding it in the direction it tightens. Screw the adaptor on by hand, then finish with a spanner, stopping once it is firm, as plastic female threads can split if forced onto a tapered metal thread. Cut the rural poly square, clean off any burrs and back off the nut. Push the pipe in until it reaches the internal stop, tighten the nut firmly by hand and finish with a fitting spanner. Support the pipe near the joint so it does not pull on the valve or tap, then open the water slowly and check both ends.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an R31 female adaptor used for?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It connects rural poly pipe to a male BSP threaded fitting, such as a tap, ball valve, pump outlet, nipple, riser or float valve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you connect rural poly pipe to a male BSP fitting?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Screw an R31 female adaptor onto the male BSP thread with thread tape, then push the rural poly pipe into the compression end and tighten the nut.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich female adaptor is used for PE irrigation pipe?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It depends on the pipe. For rural poly, use the R31 Series. For metric PE pipe, use a metric compression female adaptor, as the two pipes have different outside diameters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat does R31-2520 mean?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It is the 1 inch pipe to ¾ inch female thread size. The first number is the pipe size and the second is the thread size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I screw it onto a metal fitting?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Yes. Use thread tape and tighten firmly without forcing it, as plastic threads can split if over-tightened onto tapered metal threads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a rural poly female adaptor in Sydney?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e R31 Rural Poly Compression Female Adaptors are available from BPG Supplies, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"R31-2015","offer_id":42157717618753,"sku":null,"price":5.0,"currency_code":"AUD","in_stock":false},{"title":"R31-2020 (3\/4\" x3\/4\")","offer_id":42118231392321,"sku":null,"price":5.0,"currency_code":"AUD","in_stock":true},{"title":"R31-2515 ( 3\/4\" x 1\/2\")","offer_id":42152323022913,"sku":null,"price":10.0,"currency_code":"AUD","in_stock":true},{"title":"R31-2520 (1\" x 3\/4\")","offer_id":42118231425089,"sku":null,"price":7.0,"currency_code":"AUD","in_stock":true},{"title":"R31-2525 (1\" x 1\")","offer_id":42118231457857,"sku":null,"price":7.0,"currency_code":"AUD","in_stock":true},{"title":"R31-3220 (1 1\/4\" x 3\/4\")","offer_id":42152323285057,"sku":null,"price":12.0,"currency_code":"AUD","in_stock":true},{"title":"R31-3225 (1 1\/4\" x 1\")","offer_id":42118231490625,"sku":null,"price":12.0,"currency_code":"AUD","in_stock":true},{"title":"R31-3232( 1 1\/4\" x 1 1\/4)","offer_id":42152322859073,"sku":null,"price":7.0,"currency_code":"AUD","in_stock":true},{"title":"R31-4032( 1 1\/2\" x 1 1\/4\")","offer_id":42152311324737,"sku":null,"price":7.0,"currency_code":"AUD","in_stock":true},{"title":"R31-5050 (2\" x2\")","offer_id":42118231523393,"sku":null,"price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/Female-Adaptor-Poly-Compression-Fitting-BSP-Thread-_-R31-Series-HR-Product-218300449.jpg?v=1744343735"},{"product_id":"hex-nipple-shn-threaded-pipe-fitting","title":"Hex Nipple SHN – Black Plastic BSP Male x Male Threaded Connector for Irrigation","description":"\u003ch2\u003eBSP Hex Nipple for Joining Two Female Threaded Fittings\u003c\/h2\u003e\n\u003cp\u003eThe SHN Hex Nipple is a black plastic male x male fitting with a BSP thread on each end and a hex in the middle. It joins two female threaded fittings or outlets directly, such as a valve to a filter, a tap timer to a pressure reducer, or a tee to a socket, in garden, landscape and drip irrigation systems.\u003c\/p\u003e\n\u003ch2\u003eJoining Two Female Threads Face to Face\u003c\/h2\u003e\n\u003cp\u003eValves, filters, pressure reducers, tees, sockets and many tank outlets have female threads. When two of these need to connect, a hex nipple sits between them with a male thread going into each. It keeps the two parts close together, with no pipe in between, which makes for a short, tidy assembly in a valve box, at a tap or at the head of an irrigation system.\u003c\/p\u003e\n\u003ch2\u003eClose Coupling at the Head of Your System\u003c\/h2\u003e\n\u003cp\u003eA typical drip or garden irrigation head works from the tap outward: tap, then a filter, then a pressure reducer, then the line. Where those parts have female threads, hex nipples join them back to back in a compact row. The same goes for manifolds built from tees and valves, where nipples link each part to the next so the whole manifold can be unscrewed and serviced later.\u003c\/p\u003e\n\u003ch2\u003eThe Hex in the Middle\u003c\/h2\u003e\n\u003cp\u003eThe hex gives you a spanner grip, so you can tighten each thread into its fitting without gripping the threads themselves and damaging them. Hold the hex while you turn the fitting on the other end, and both joints can be snugged up evenly. The black plastic body will not rust, and works alongside the matching sockets, reducing sockets and threaded tees in the range.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMale BSP thread at both ends\u003c\/li\u003e\n\u003cli\u003eJoins two female threaded fittings or outlets\u003c\/li\u003e\n\u003cli\u003eCentral hex for spanner grip without damaging threads\u003c\/li\u003e\n\u003cli\u003eKeeps valves, filters and reducers close coupled\u003c\/li\u003e\n\u003cli\u003eBlack plastic that will not rust\u003c\/li\u003e\n\u003cli\u003eCan be unscrewed and reused\u003c\/li\u003e\n\u003cli\u003ePairs with threaded sockets, reducers and tees\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCode: SHN\u003c\/li\u003e\n\u003cli\u003eType: Hex nipple (male x male)\u003c\/li\u003e\n\u003cli\u003eConnection: Male BSP thread at both ends\u003c\/li\u003e\n\u003cli\u003eMaterial: Black plastic\u003c\/li\u003e\n\u003cli\u003eUse: Garden, landscape and drip irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTaping and Tightening a Nipple\u003c\/h2\u003e\n\u003cp\u003eWrap both male threads with thread tape, winding it in the direction the thread tightens so it stays in place as you screw it in. Screw one end into the first fitting by hand, then turn it a little further using a spanner on the hex. Screw the second fitting onto the other end by hand, hold the nipple's hex steady, and finish tightening the fitting. When screwing a plastic nipple into a metal female thread, go firm but not forceful, as plastic threads can strip or crack if over-tightened. Turn the water on slowly and check both joints.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a hex nipple used for?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It joins two female threaded fittings or outlets in a straight line. Common uses include connecting a valve to a filter, a tap timer to a pressure reducer, and linking tees and valves in a manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you connect two female threaded pipe fittings?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Use a hex nipple that matches the thread size of both fittings. Wrap both ends with thread tape, screw one end into each fitting and tighten using a spanner on the hex.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between a hex nipple and a reducing nipple?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e A hex nipple has the same thread size at both ends. A reducing nipple has a larger thread on one end and a smaller one on the other, so it joins female fittings of different sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I screw a plastic nipple into a metal fitting?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Yes, but tighten carefully. Use thread tape and stop once the joint is firm, as forcing a plastic thread into metal can strip or crack it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for gas or compressed air?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e No. It is designed for irrigation and water systems. Gas and compressed air need fittings certified for those uses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a threaded pipe nipple in Bonnyrigg?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The SHN Hex Nipple is available from BPG Supplies, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"SHN15 -15MM","offer_id":42130979258433,"sku":null,"price":2.0,"currency_code":"AUD","in_stock":true},{"title":"SHN32-32MM","offer_id":42130979291201,"sku":null,"price":3.0,"currency_code":"AUD","in_stock":true},{"title":"SHN40-40MM","offer_id":42130979323969,"sku":null,"price":4.0,"currency_code":"AUD","in_stock":true},{"title":"SHN20-20MM","offer_id":42130979356737,"sku":null,"price":2.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/Hex-Nipple-_-SHN-_Threaded-Pipe-Fitting_-Bonnyrigg-Produce-_-Garden-Supplies-220271239.jpg?v=1744868769"},{"product_id":"reducing-socket-srs-female-threaded-pipe-fitting","title":"Reducing Socket SRS – Black Plastic BSP Female x Female Reducer for Joining Two Thread Sizes","description":"\u003ch2\u003eBSP Female Reducing Socket for Joining Two Different Thread Sizes\u003c\/h2\u003e\n\u003cp\u003eThe SRS Reducing Socket is a black plastic female x female fitting with a larger BSP thread at one end and a smaller BSP thread at the other. It joins two male threaded fittings of different sizes in a straight line, such as a 1\" male adaptor to a ¾\" valve or a ¾\" riser to a ½\" tap, in garden, landscape and drip irrigation systems.\u003c\/p\u003e\n\u003ch2\u003eStepping Down Between Two Thread Sizes\u003c\/h2\u003e\n\u003cp\u003eIrrigation systems rarely use one thread size throughout. A main line might run at 1\", while taps, timers, sprinklers and small valves are often ¾\" or ½\". A reducing socket bridges that gap in a single fitting, so you do not need to stack a socket and a separate bush to change sizes. Fewer fittings means fewer joints and fewer places for a drip to start.\u003c\/p\u003e\n\u003ch2\u003eCommon Jobs for a Reducer\u003c\/h2\u003e\n\u003cp\u003eTypical uses include fitting a smaller tap or tap timer to the end of a larger riser, connecting a large male adaptor on a poly main to a smaller valve or filter, stepping down from a pump outlet to a smaller irrigation line, and joining old and new threaded parts of different sizes during repairs. It works in either direction, so the same fitting can also step up from a smaller thread to a larger one.\u003c\/p\u003e\n\u003ch2\u003eFlow Through a Reduction\u003c\/h2\u003e\n\u003cp\u003eWater can only pass through the smaller end as fast as its size allows, so a reducer will limit flow to the capacity of the smaller thread. That is fine for feeding taps, drip zones and small sprinklers, but avoid reducing a main line more than needed, as an unnecessary step down can cut pressure and flow to everything downstream.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFemale BSP thread at both ends, one larger and one smaller\u003c\/li\u003e\n\u003cli\u003eJoins two male threaded fittings of different sizes\u003c\/li\u003e\n\u003cli\u003eReplaces a socket and bush with a single fitting\u003c\/li\u003e\n\u003cli\u003eWorks to step down or step up between sizes\u003c\/li\u003e\n\u003cli\u003eHex shoulders for holding with a spanner\u003c\/li\u003e\n\u003cli\u003eBlack plastic that will not rust\u003c\/li\u003e\n\u003cli\u003eSuits irrigation risers, taps, valves and pump connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCode: SRS\u003c\/li\u003e\n\u003cli\u003eType: Reducing socket (female x female)\u003c\/li\u003e\n\u003cli\u003eConnection: Female BSP thread, larger size x smaller size\u003c\/li\u003e\n\u003cli\u003eMaterial: Black plastic\u003c\/li\u003e\n\u003cli\u003eUse: Garden, landscape and drip irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTightening Two Different Thread Sizes\u003c\/h2\u003e\n\u003cp\u003eConfirm the size of each male fitting before you start, as both ends need to match exactly. Wrap each male thread with thread tape, winding it the same way the thread tightens. Screw the larger fitting in first by hand, then hold the reducer by its hex with a spanner and add a small extra turn. Repeat with the smaller fitting, taking extra care, as the smaller plastic thread is easier to strip or crack. Turn the water on slowly and check both ends.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a reducing socket used for?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It joins two male threaded fittings of different sizes in a straight line. Common uses include fitting a smaller tap to a larger riser, connecting a large poly adaptor to a smaller valve, and stepping down from a pump outlet to an irrigation line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you connect two different threaded pipe sizes?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Use a female reducing socket with one end matching each thread size. Wrap both male threads with thread tape and screw them into the matching ends of the reducer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between a reducing socket and a standard socket?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e A standard socket has the same thread size at both ends and joins two equal fittings. A reducing socket has a larger thread at one end and a smaller one at the other, so it joins fittings of different sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes a reducing socket lower water pressure?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It limits flow to the capacity of the smaller end. For taps, timers and drip zones this is usually fine, but avoid unnecessary reductions on main lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for gas or air lines?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e No. It is designed for irrigation and water systems. Gas lines need certified gas fittings installed by a licensed gas fitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a BSP reducer fitting in Bonnyrigg?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The SRS Reducing Socket is available from BPG Supplies, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"SRS2015-20MMX15MM","offer_id":42130982764609,"sku":null,"price":2.0,"currency_code":"AUD","in_stock":true},{"title":"SRS2520-25MMX20","offer_id":42130982797377,"sku":null,"price":3.0,"currency_code":"AUD","in_stock":true},{"title":"SRS3225-32MMX25MM","offer_id":42130982830145,"sku":null,"price":4.0,"currency_code":"AUD","in_stock":true},{"title":"SRS4032-40MMX32","offer_id":42130982862913,"sku":null,"price":6.0,"currency_code":"AUD","in_stock":true},{"title":"SRS5040-50MMX40MM","offer_id":42130982895681,"sku":null,"price":8.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/Reducing-Socket-_-SRS-_Female-Threaded-Pipe-Fitting_-HR-Product-220272550.jpg?v=1744869690"},{"product_id":"socket-ss-female-threaded-coupling-fitting","title":"Female Threaded Socket SS – Black Plastic BSP Female x Female Pipe Coupling for Irrigation","description":"\u003ch2\u003eFemale Threaded Socket for Joining Two Male Threaded Fittings\u003c\/h2\u003e\n\u003cp\u003eThe SS Female Threaded Socket is a straight black plastic coupling with a female BSP thread at each end. It joins two male threaded fittings of the same size in a straight line, such as two nipples, a male adaptor and a valve, or a riser and a tap, in garden, landscape and drip irrigation systems.\u003c\/p\u003e\n\u003ch2\u003eThe Simplest Threaded Join\u003c\/h2\u003e\n\u003cp\u003eWhen two parts both have male threads, they cannot screw into each other. A socket sits between them and joins them directly. It is the threaded equivalent of a pipe joiner and one of the most useful fittings to keep on hand, whether you are extending a riser, connecting a poly male adaptor to a male outlet on a valve or pump, or rebuilding a section of threaded pipework after a repair.\u003c\/p\u003e\n\u003ch2\u003eExtending Risers and Building Manifolds\u003c\/h2\u003e\n\u003cp\u003eSockets are often used with threaded nipples to build up length. Two nipples joined with a socket make a longer riser for a sprinkler or tap, and a run of sockets, nipples and tees can form a small threaded manifold that splits water from one tap or valve to several zones. Because every joint is threaded, the whole assembly can be taken apart again for cleaning or changes.\u003c\/p\u003e\n\u003ch2\u003eHex Ends for a Firm Grip\u003c\/h2\u003e\n\u003cp\u003eBoth ends have a hex shoulder, so you can hold the socket steady with a spanner while tightening fittings into it. That stops the socket turning with the fitting and helps you get each side snug without overloading the thread. The black plastic body will not rust, and the dark colour blocks light to help limit algae inside the line.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStraight coupling with a female BSP thread at each end\u003c\/li\u003e\n\u003cli\u003eJoins two male threaded fittings of the same size\u003c\/li\u003e\n\u003cli\u003eHex shoulders on both ends for spanner grip\u003c\/li\u003e\n\u003cli\u003eBlack plastic that will not rust\u003c\/li\u003e\n\u003cli\u003eCan be unscrewed and reused\u003c\/li\u003e\n\u003cli\u003eSuits irrigation risers, manifolds and threaded repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCode: SS\u003c\/li\u003e\n\u003cli\u003eType: Equal socket (female x female)\u003c\/li\u003e\n\u003cli\u003eConnection: Female BSP thread at both ends\u003c\/li\u003e\n\u003cli\u003eMaterial: Black plastic\u003c\/li\u003e\n\u003cli\u003eUse: Garden, landscape and drip irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting a Good Seal\u003c\/h2\u003e\n\u003cp\u003eWrap each male thread with thread tape, winding it in the same direction the thread tightens. Screw the first fitting in by hand, then hold the socket with a spanner on one hex and tighten the fitting with a small extra turn. Repeat on the other side. Plastic female threads can split if a tapered metal fitting is forced in too far, so tighten firmly but do not overdo it. Check that both fittings match the socket's thread size and type, then turn the water on and check both ends.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a female threaded socket used for?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It joins two male threaded fittings of the same size in a straight line. Common uses include extending risers with nipples, connecting a male adaptor to a male valve or pump outlet, and building threaded manifolds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you connect two male threaded pipe fittings?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Screw both fittings into a female threaded socket of the matching size. Wrap each male thread with thread tape and hold the socket with a spanner while tightening each side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between a socket and a reducing socket?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e An equal socket like this one has the same thread size at both ends. A reducing socket has a larger thread at one end and a smaller thread at the other, so it can join two male fittings of different sizes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs SS stainless steel?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e No. In this case SS is the product code. This socket is made from black plastic for irrigation and water lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for gas or air lines?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e No. It is designed for irrigation and water systems. Gas lines must use fittings that are certified for gas and installed by a licensed gas fitter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a BSP female coupling in Sydney?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The SS Female Threaded Socket is available from BPG Supplies, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"SS25","offer_id":42130992529473,"sku":null,"price":2.0,"currency_code":"AUD","in_stock":true},{"title":"SS40","offer_id":42130992562241,"sku":null,"price":4.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/Socket-_-SS-_Female-Threaded-Coupling-Fitting_-HR-Product-220279227.jpg?v=1744871135"},{"product_id":"female-tee-st-hr-irrigation-fitting-for-garden-drip-systems","title":"HR Female Threaded Tee ST – Female BSP x Female x Female Irrigation Tee for Garden \u0026 Drip Systems","description":"\u003ch2\u003eHR Female Threaded Tee for Joining Three Male Threaded Fittings\u003c\/h2\u003e\n\u003cp\u003eThe HR Female Tee ST is a black plastic irrigation tee with a female BSP thread on all three ports. It joins three male threaded fittings, such as male adaptors, nipples, risers, taps or valves, at a T-junction, letting you split a threaded line into two or add a threaded branch in garden, landscape and drip irrigation systems.\u003c\/p\u003e\n\u003ch2\u003eSplitting a Threaded Line in Two\u003c\/h2\u003e\n\u003cp\u003eThreaded fittings are common around taps, valves, filters and pressure reducers, where joints may need to be undone later. A female threaded tee sits in that part of the system and splits the flow, for example sending water from one tap to two drip zones, or feeding both a hose tap and an irrigation line from one outlet. With all three ends threaded, nothing needs to be glued or crimped, and the fittings can be unscrewed if the layout changes.\u003c\/p\u003e\n\u003ch2\u003eAdding a Threaded Branch to a Poly Line\u003c\/h2\u003e\n\u003cp\u003eTo add the tee into a poly irrigation line, fit a male threaded adaptor to each cut end of the poly pipe and screw them into the two run ports of the tee. The third port then takes whatever you need on the branch: a riser for a sprinkler, an in-line tap, a ball valve to isolate a new zone, or another male adaptor to carry a second poly line off in a new direction.\u003c\/p\u003e\n\u003ch2\u003eBlack Plastic for Outdoor Irrigation\u003c\/h2\u003e\n\u003cp\u003eThe black plastic body is lightweight, will not rust like metal fittings and is UV stabilised for outdoor use. Its dark colour also blocks light, which helps limit algae inside the fitting. The hex shoulders on each port give a spanner something to grip, so you can hold the tee steady while tightening fittings into it.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFemale BSP thread on all three ports\u003c\/li\u003e\n\u003cli\u003eJoins male adaptors, nipples, risers, taps and valves\u003c\/li\u003e\n\u003cli\u003eSplits a threaded line or adds a threaded branch\u003c\/li\u003e\n\u003cli\u003eHex shoulders for holding the tee while tightening\u003c\/li\u003e\n\u003cli\u003eBlack plastic body that will not rust\u003c\/li\u003e\n\u003cli\u003eUV stabilised for outdoor use\u003c\/li\u003e\n\u003cli\u003eSuits garden, landscape, greenhouse and drip irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: HR\u003c\/li\u003e\n\u003cli\u003eCode: ST\u003c\/li\u003e\n\u003cli\u003eType: Equal tee (female x female x female)\u003c\/li\u003e\n\u003cli\u003eConnection: Female BSP thread on all three ports\u003c\/li\u003e\n\u003cli\u003eMaterial: Black plastic, UV stabilised\u003c\/li\u003e\n\u003cli\u003eUse: Garden and drip irrigation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBuilding a Sealed Threaded Tee\u003c\/h2\u003e\n\u003cp\u003eWrap every male thread going into the tee with thread tape, winding it in the same direction the thread tightens so it does not peel back. Screw each fitting in by hand, then hold the tee steady with a spanner on its hex while giving each fitting a small extra turn. Plastic female threads can split if they are over-tightened or if tapered metal fittings are forced in, so go firm rather than tight. Make sure all three ports use the same thread size and type as your fittings. Support the tee on a stake or bracket if heavy valves or risers are attached, then turn the water on and check each joint.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a female threaded tee used for in irrigation?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It joins three male threaded fittings at a T-junction, splitting one threaded line into two or adding a threaded branch. Common uses include splitting a tap outlet into two zones and adding valves, risers or taps along a line.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you add a threaded branch to an irrigation line?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Cut the poly line, fit a male threaded adaptor to each cut end and screw them into the two run ports of the tee. The third port takes the threaded branch, such as a riser, tap, valve or another male adaptor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich tee fitting is used for a female BSP irrigation connection?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e If your fittings all have male BSP threads, use a female threaded tee like this one. If you need the tee to screw into a female BSP outlet, choose a tee with a male threaded port instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need thread tape?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Yes. Wrap each male thread with thread tape before screwing it into the tee to help the joints seal and make them easier to undo later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I connect poly pipe directly to it?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Not directly. Fit a male threaded poly adaptor to the pipe first, then screw the adaptor into the tee.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a female BSP tee in Bonnyrigg?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The HR Female Tee ST is available from BPG Supplies, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"ST15-15MM","offer_id":42151701151809,"sku":null,"price":3.0,"currency_code":"AUD","in_stock":true},{"title":"ST20-20MM","offer_id":42151701184577,"sku":null,"price":5.0,"currency_code":"AUD","in_stock":true},{"title":"ST25-25MM","offer_id":42151701217345,"sku":null,"price":8.0,"currency_code":"AUD","in_stock":true},{"title":"ST40-40MM","offer_id":42151701250113,"sku":null,"price":15.0,"currency_code":"AUD","in_stock":true},{"title":"ST50-50MM","offer_id":42151701282881,"sku":null,"price":20.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/Female-Tee-ST-HR-_-Irrigation-Fitting-for-Garden-_-Drip-Systems-Bonnyrigg-Produce-_-Garden-Supplies-222346525.jpg?v=1746138632"},{"product_id":"poly-compression-tee-fitting-pope-m61-series-various-sizes-16mm-to-110mm","title":"Metric Poly Compression Tee M61 Series – Equal PE Pipe Tee with Blue Nuts, Sizes up to 110mm","description":"\u003ch2\u003eM61 Metric Poly Compression Tee for Branching PE Pipe\u003c\/h2\u003e\n\u003cp\u003eThe M61 Series Metric Poly Compression Tee is an equal tee that joins three lengths of metric PE poly pipe at a T-junction, with a blue compression nut on each end. It lets you branch a main line into two without glue, heat or barbs, and suits cold water irrigation, garden, nursery and farm water lines. The series covers metric pipe sizes from 16mm to 110mm.\u003c\/p\u003e\n\u003ch2\u003eBranching a Metric PE Line\u003c\/h2\u003e\n\u003cp\u003eEvery irrigation layout reaches a point where one line needs to become two: a main splitting into separate zones, a supply line running off to a new garden bed, or a farm main branching to a trough and a tank. An equal tee handles that junction with all three ends the same size, so the branch carries the same capacity as the main. Because the ends are compression joints, the tee can also be undone later if you need to extend or re-route the system.\u003c\/p\u003e\n\u003ch2\u003eFrom Garden Drip to Farm Main: 16mm to 110mm\u003c\/h2\u003e\n\u003cp\u003eMetric PE pipe is sized by its outside diameter, and this series covers the full spread of common sizes. The smaller 16mm and 20mm tees suit garden and nursery lines, 25mm and 32mm suit typical home irrigation and house supply mains, 40mm to 63mm suit larger properties and farm lines, and 75mm to 110mm suit major mains and commercial irrigation runs. Pick the size that matches the outside diameter of your pipe.\u003c\/p\u003e\n\u003ch2\u003eInside Each Connection\u003c\/h2\u003e\n\u003cp\u003eEach of the three ends works the same way. Under the blue nut, a grip ring holds the outside of the pipe and an O-ring seals around it. Tightening the nut locks the pipe in and compresses the seal. Because the joint relies on the pipe's outside diameter, it is important to use metric PE pipe with these fittings, rather than rural or low density poly, which are sized differently.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEqual tee, poly x poly x poly, joins three metric PE pipes\u003c\/li\u003e\n\u003cli\u003eBlue compression nuts with grip ring and O-ring seal\u003c\/li\u003e\n\u003cli\u003eNo glue, heat or barbs needed\u003c\/li\u003e\n\u003cli\u003eCan be undone and reused when lines change\u003c\/li\u003e\n\u003cli\u003eUV stabilised for outdoor use\u003c\/li\u003e\n\u003cli\u003eFor cold water irrigation and water distribution\u003c\/li\u003e\n\u003cli\u003eSizes from 16mm to 110mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSeries: M61\u003c\/li\u003e\n\u003cli\u003eType: Equal tee (poly x poly x poly)\u003c\/li\u003e\n\u003cli\u003eSuitable pipe: Metric PE poly pipe (sized by outside diameter)\u003c\/li\u003e\n\u003cli\u003eUse: Cold water irrigation and water lines\u003c\/li\u003e\n\u003cli\u003eColour: Black body, blue nuts\u003c\/li\u003e\n\u003cli\u003eSizes: 16mm, 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlanning and Fitting the Tee\u003c\/h2\u003e\n\u003cp\u003ePlan where the tee goes so the branch heads straight toward where it is needed, which saves extra elbows and keeps flow losses down. Turn off and drain the line, then cut the pipe square with pipe cutters and remove any burrs, chamfering the outside edge slightly so it does not damage the O-ring. Mark the insertion depth on each pipe. Back off each nut, push the pipes in to the mark, then tighten the nuts firmly by hand. Smaller sizes can be finished with a fitting spanner, while larger sizes need a proper compression fitting wrench. Support the tee on larger lines so the pipes do not pull on the joints, then turn on the water slowly and check all three connections.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat fitting is used to create a branch in metric poly pipe?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e A metric poly compression tee. An equal tee like the M61 creates a branch the same size as the main, while a reducing tee creates a smaller branch.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you connect three metric poly pipes together?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Use an equal metric compression tee. Cut each pipe square, push it fully into one of the three ends, and tighten each blue nut firmly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is an M61 poly tee used for?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e It joins three metric PE pipes at a T-junction, splitting one line into two. It is used to divide irrigation mains into zones, branch to new garden beds and run farm water to troughs and tanks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use it on rural poly pipe?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e No. Metric compression fittings are made for metric PE pipe sized by outside diameter. Rural poly is sized differently and needs rural fittings to seal properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need tools to install it?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Smaller sizes can be tightened by hand and finished with a fitting spanner. Larger sizes, especially 63mm and above, need a compression fitting wrench to tighten the nuts properly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy a metric poly tee in Sydney?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e M61 Metric Poly Compression Tees are available from BPG Supplies, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"M61-25 (25MM)","offer_id":42152353955905,"sku":null,"price":15.0,"currency_code":"AUD","in_stock":true},{"title":"M61-32(32MM)","offer_id":42152353988673,"sku":null,"price":20.0,"currency_code":"AUD","in_stock":true},{"title":"M61-40(40MM)","offer_id":42152354021441,"sku":null,"price":30.0,"currency_code":"AUD","in_stock":true},{"title":"M61-50(50MM)","offer_id":42152354054209,"sku":null,"price":40.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/Poly-Compression-Tee-Fitting-_-Pope-M61-Series-_Various-Sizes-16mm-to-110mm_-HR-PRODUCT-222349867.jpg?v=1746147564"},{"product_id":"25mm-green-replacement-washer-low-pressure-pack-of-5","title":"HR Products 25mm Replacement Washer for 1\" Nut and Tail – Low Pressure Irrigation, Green, Pack of 5","description":"\u003ch2\u003eHR Products 25mm Replacement Washer for 1\" Nut and Tail Fittings\u003c\/h2\u003e\n\u003cp\u003eThe HR Products 25mm Replacement Washer is a flat green sealing washer made to suit 1\" nut and tail fittings in low pressure irrigation systems. Part of the HR Products Professional Series, the washers are UV stabilised for outdoor use, and this pack contains 5, so you have spares on hand for the next time a joint starts to weep.\u003c\/p\u003e\n\u003ch2\u003eWhere a Nut and Tail Washer Does Its Job\u003c\/h2\u003e\n\u003cp\u003eA nut and tail fitting joins two parts with a loose threaded nut, and the seal comes from the washer squeezed between the tail and the fitting it screws onto. You will find them on tank outlets, low pressure irrigation valves, pump connections and 25mm rural poly lines. Over time the washer flattens, hardens in the sun or cracks, and the joint starts to drip even when the nut is tight. Swapping in a fresh washer is usually all it takes to seal it again.\u003c\/p\u003e\n\u003ch2\u003eBuilt for Low Pressure Irrigation\u003c\/h2\u003e\n\u003cp\u003eThese washers are designed for low pressure irrigation systems, such as gravity-fed tank lines, garden irrigation and drip systems running through a pressure reducer. UV stabilisation helps them hold up in fittings that sit in the sun, where ordinary washers tend to perish faster.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuits 1\" (25mm) nut and tail fittings\u003c\/li\u003e\n\u003cli\u003eFlat sealing washer to stop drips at threaded joints\u003c\/li\u003e\n\u003cli\u003eUV stabilised for outdoor use\u003c\/li\u003e\n\u003cli\u003eDesigned for low pressure irrigation systems\u003c\/li\u003e\n\u003cli\u003ePack of 5 for replacements and spares\u003c\/li\u003e\n\u003cli\u003eHR Products Professional Series, pack carries the Australian Made logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: HR Products (Professional Series)\u003c\/li\u003e\n\u003cli\u003ePart number: 44085P5\u003c\/li\u003e\n\u003cli\u003eSize: 25mm, suits 1\" nut and tail\u003c\/li\u003e\n\u003cli\u003eColour: Green\u003c\/li\u003e\n\u003cli\u003ePack size: 5\u003c\/li\u003e\n\u003cli\u003eUse: Low pressure irrigation systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Replace a Nut and Tail Washer\u003c\/h2\u003e\n\u003cp\u003eTurn off the water or close the tank valve, then undo the nut by hand or with multigrips. Remove the old washer and clean any grit, dirt or old washer pieces from both sealing faces, as even a small bit of debris can cause a leak. Seat the new washer flat inside the nut or against the tail so it sits evenly, then screw the nut back on straight to avoid cross-threading. Tighten firmly by hand and then give it a small extra turn, as over-tightening can squash the washer out of shape. Turn the water back on and check the joint. Keep the spare washers somewhere dry and out of the sun until needed.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat size fitting does a 25mm washer suit?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e This washer suits 1\" nut and tail fittings, which are the size used on 25mm low pressure irrigation and tank connections. It is sized for the fitting, not a garden hose connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy are green washers used for low pressure systems?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e The colour itself does not change how the washer performs. What matters is that it is designed for low pressure irrigation, such as tank and garden watering systems. For mains pressure or high pressure pipework, use a washer and fitting rated for that pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you stop leaks at a 25mm fitting using a replacement washer?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Turn off the water, undo the nut, remove the old washer and clean both sealing faces. Fit the new washer flat, screw the nut back on straight and tighten firmly without overdoing it, then check for drips.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use these on a standard garden hose?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Standard garden hose fittings use smaller washers and O-rings, so these will not suit them. They are made for 1\" nut and tail fittings, such as those on tanks, pumps and 25mm irrigation lines.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow often should nut and tail washers be replaced?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Replace them whenever a joint starts dripping, or when you undo a fitting and the washer looks flattened, cracked or hard. Fittings exposed to the sun usually need new washers more often.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy HR Products low pressure washers in Sydney?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e HR Products 25mm Replacement Washers are available online from BPG Supplies in a pack of 5, with local pickup from our store in Bonnyrigg in Sydney's south-west and delivery across Australia.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"Default Title","offer_id":42164633043009,"sku":null,"price":9.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/25mm-Green-Replacement-Washer-_-Low-Pressure-_-Pack-of-5-Bonnyrigg-Produce-_-Garden-Supplies-223502137.jpg?v=1747001277"},{"product_id":"900-micro-spray-green-full-circle-spray-pattern-pack-of-10","title":"HR Products 90° Two Piece Micro Spray, Quarter Circle – 4mm Thread, 2.2m Radius, Pack of 10","description":"\u003ch2\u003eHR Products 90° Two Piece Micro Spray for Garden Bed Corners\u003c\/h2\u003e\n\u003cp\u003eThe HR Products 90° Two Piece Micro Spray is a quarter circle micro sprinkler from the Professional Series, made for watering garden beds and landscaped areas in low pressure irrigation systems. At 100kPa it throws a 90° spray out to a 2.2m radius at 54 litres per hour, and its 4mm thread screws into rigid risers and micro adaptors. This pack contains 10 micro sprays.\u003c\/p\u003e\n\u003ch2\u003eWhy a 90° Spray Suits Corners\u003c\/h2\u003e\n\u003cp\u003eA full circle spray set in the corner of a bed wastes three quarters of its water on fences, paths and walls. A 90° spray only covers the quarter of a circle in front of it, so when you place it in a corner, the water goes into the bed instead of onto the house or the driveway. Four of them, one in each corner of a small square bed, overlap to give even coverage across the whole area. They also suit the tight corners of courtyards, raised beds and planter boxes.\u003c\/p\u003e\n\u003ch2\u003ePerformance at Low Pressure\u003c\/h2\u003e\n\u003cp\u003eTested at 100kPa, each spray delivers 54 LPH across a 2.2m radius. Those figures help you plan a system: add up the flow of every spray on a line to make sure your tap and pressure reducer can supply them, and space sprays so their patterns overlap. Because these are designed for low pressure irrigation, running them through a pressure reducer and filter keeps the pattern even and protects fittings.\u003c\/p\u003e\n\u003ch2\u003eTwo Piece Design with a 4mm Thread\u003c\/h2\u003e\n\u003cp\u003eThe two piece construction and 4mm thread make these sprays easy to fit and maintain. They screw into standard rigid risers, riser stakes and micro adaptors, and the UV stabilised plastic is made to handle ongoing exposure to the Australian sun.\u003c\/p\u003e\n\u003ch2\u003eKey Features and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e90° quarter circle spray pattern for corners and edges\u003c\/li\u003e\n\u003cli\u003e2.2m radius and 54 LPH at 100kPa\u003c\/li\u003e\n\u003cli\u003e4mm thread suits rigid risers and micro adaptors\u003c\/li\u003e\n\u003cli\u003eTwo piece design\u003c\/li\u003e\n\u003cli\u003eUV stabilised for outdoor use\u003c\/li\u003e\n\u003cli\u003eFor low pressure irrigation systems\u003c\/li\u003e\n\u003cli\u003ePack of 10 micro sprays\u003c\/li\u003e\n\u003cli\u003eHR Products Professional Series, pack carries the Australian Made logo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBrand: HR Products (Professional Series)\u003c\/li\u003e\n\u003cli\u003ePart number: HRMS5-GP10\u003c\/li\u003e\n\u003cli\u003eSpray pattern: 90° (quarter circle)\u003c\/li\u003e\n\u003cli\u003eRadius: 2.2m at 100kPa\u003c\/li\u003e\n\u003cli\u003eFlow rate: 54 LPH at 100kPa\u003c\/li\u003e\n\u003cli\u003eThread: 4mm\u003c\/li\u003e\n\u003cli\u003ePack size: 10\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlanning and Installing Your Sprays\u003c\/h2\u003e\n\u003cp\u003ePlace a 90° spray in each corner of the bed, angled so the spray points into the bed, and use half circle sprays along long edges if the bed is wider than about 4m. Space sprays so each one reaches roughly to the next, which gives even overlap and avoids dry patches. To fit them, screw each spray into a rigid riser or riser stake, then connect the riser to your 13mm or 19mm poly line with a barbed joiner and 4mm micro tube, or directly into a riser adaptor on the line. Keep sprays above the foliage so leaves do not block the pattern, and raise them as plants grow. Flush the line before fitting the sprays to clear any grit.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you install micro sprayers into irrigation tubing?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Screw the spray onto a rigid riser, riser stake or micro adaptor using its 4mm thread. Then connect that riser to your main poly line, either with a length of 4mm micro tube and barbed fittings or with a riser adaptor fitted directly into the pipe.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy use micro sprays instead of misting nozzles in garden beds?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Micro sprays produce larger droplets that travel further and land on the soil, so less water drifts away or evaporates. Misters suit propagation and humidity, while micro sprays are better for watering established garden beds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this a full circle spray?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e No. This is a 90° quarter circle spray, made for corners. For open areas, a 180° spray suits edges and a 360° spray suits the middle of a bed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat pressure do these micro sprays need?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e They are designed for low pressure irrigation systems, with a rated performance of 2.2m radius and 54 LPH at 100kPa. Use a pressure reducer for even spray and longer fitting life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many sprays can I run on one line?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e Add up the flow of all the sprays you plan to use (54 LPH each at 100kPa) and compare it with your water supply. For larger areas, split the garden into separate zones.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere can I buy HR Products micro sprays in Australia?\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e HR Products 90° Two Piece Micro Sprays are available online from BPG Supplies in a pack of 10, with delivery across Australia and local pickup from our store in Bonnyrigg in Sydney's south-west.\u003c\/p\u003e","brand":"HR PRODUCT","offers":[{"title":"Default Title","offer_id":42164641235009,"sku":null,"price":9.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0569\/3394\/1313\/files\/900-Micro-Spray-_-Green-_-Full-Circle-Spray-Pattern-_-Pack-of-10-Bonnyrigg-Produce-_-Garden-Supplies-223502837.jpg?v=1747002015"}],"url":"https:\/\/bpgsupplies.com.au\/collections\/hr-product.oembed","provider":"Bonnyrigg Produce \u0026 Garden Supplies","version":"1.0","type":"link"}